YEO MECHANICAL, LLC
YEO MECHANICAL, LLC IS AVAILABLE TO PERFORM COMPREHENSIVE INSPECTIONS ON YOUR RESIDENTIAL OR COMMERCIAL HVAC SYSTEM. OUR HVAC INSPECTIONS EVALUATE ALL MAJOR COMPONENTS AND SAFETY MECHANISMS WITHIN THE HVAC SYSTEM, PROVIDING CUSTOMERS VALUABLE INSIGHT INTO THE EXPECTED RELIABILITY AND PERFORMANCE OF THE HVAC EQUIPMENT. HVAC INSPECTIONS ARE MOST OFTEN REQUESTED WHEN A GENERAL HOME INSPECTOR PERFORMS AN INSPECTION AS PART OF A HOME PURCHASE OR SALE AND NOTES CONCERNS REGARDING THE INTEGRITY OF AN HVAC SYSTEM. HOWEVER, WE CAN INSPECT ANY RESIDENTIAL OR COMMERCIAL HVAC SYSTEM FOR ANY REASON!
BENEFITS OF AN HVAC INSPECTION WITH US
-
HONEST FINDINGS, INFORMATIVE FOR ALL INVOLVED PARTIES
-
EQUIPMENT EVALUATION DONE BY HVAC PROFESSIONAL
-
PEACE OF MIND ABOUT THE SAFETY OF YOUR EQUIPMENT, HOME, AND FAMILY
-
AVOID UNEXPECTED REPAIR/REPLACEMENT SERVICES AND HIGH ENERGY BILLS AFTER SETTLING INTO YOUR NEW HOME
-
ALL FINDINGS ARE DOCUMENTED AND REVIEWED WITH THE CUSTOMER UPON INSPECTION COMPLETION
-
RECEIVE FORMAL REPORT WITHIN 24 HOURS THAT INCLUDES A DESCRIPTION OF OBSERVATIONS, RELEVANT PHOTOS, OUR PROFESSIONAL RECOMMENDATIONS, AND ANY ESTIMATED REPAIR/REPLACEMENT COSTS
OUR INSPECTION CHECKLIST
GENERAL
-
CHECK THERMOSTAT OPERATION AND SETTINGS
-
VISUALLY INSPECT ACCESSIBLE DUCTWORK AND REGISTERS
-
VISUALLY INSPECT CONDENSATE DRAIN LINE, PUMP, AND PAN
-
VISUALLY INSPECT CONDITION OF VISIBLE GAS PIPING + VALVES
-
TEST FOR GAS LEAKS FROM VISIBLE PIPING
-
CHECK GAS PRESSURE FOR PROPER READINGS
-
TEST FOR CARBON MONOXIDE NEAR INDOOR EQUIPMENT
-
CHECK FOR EXCESSIVE RUST, SOOT, OR DEBRIS
HEATING
-
OVERALL CONDITION OF EQUIPMENT
-
VERIFY ADEQUATE EQUIPMENT CLEARANCE
-
VERIFY PROPER EXHAUST VENTING AND CLEARANCE
-
VERIFY EQUIPMENT STARTS/RUNS NORMALLY
-
VISUALLY INSPECT EVAPORATOR COIL
-
VISUALLY INSPECT BURNER ASSEMBLY
-
CHECK FLAME SENSOR FOR PROPER MICRO-AMPS
-
VISUALLY INSPECT IGNITOR AND TEST RESISTANCE
-
CHECK OPERATION OF INDUCER MOTOR AND TEST AMP DRAW
-
TEST BLOWER MOTOR CAPACITOR FOR PROPER MFD
-
TEST BLOWER MOTOR FOR PROPER AMP DRAW + RESISTANCE
-
CONDITION OF BLOWER ASSEMBLY WHEEL
-
VISUALLY INSPECT CIRCUIT BOARD AND TEST FOR VOLTAGE DROP
-
INSPECT HEAT EXCHANGER USING CAMERA SCOPE
-
CHECK CONDITION OF AIR FILTER
-
CHECK OPERATION OF SAFETY SWITCHES/COMPONENTS
-
VISUALLY INSPECT ACCESSIBLE WIRES AND CONNECTIONS
-
TEST TEMPERATURE SPLIT BETWEEN SUPPLY AND RETURN AIR VENTS
COOLING
-
OVERALL CONDITION OF EQUIPMENT
-
VERIFY ADEQUATE EQUIPMENT CLEARANCE
-
VERIFY EQUIPMENT STARTS/RUNS NORMALLY
-
VISUALLY INSPECT CONDENSER COIL
-
VISUALLY INSPECT OUTDOOR REFRIGERANT LINES
-
VISUALLY INSPECT CONTACTOR AND RELAY
-
CONDITION AND OPERATION OF FAN MOTOR AND BLADES
-
TEST AIR CONDITIONER AMP DRAW
-
TEST SUPERHEAT (SUCTION LINE TEMPERATURE/PRESSURE)
-
TEST SUBCOOLING (LIQUID LINE TEMPERATURE/PRESSURE)
-
VERIFY REFRIGERANT TYPE
-
TEST COMPRESSOR AMP DRAW
-
TEST MOTOR CAPACITOR(S) FOR PROPER MFD
-
TEST TIME DELAY
-
RUN DEFROST CYCLE
-
CHECK OPERATION OF SAFETY SWITCHES/COMPONENTS
-
VISUALLY INSPECT ACCESSIBLE WIRES AND CONNECTIONS
-
TEST TEMPERATURE SPLIT BETWEEN SUPPLY AND RETURN AIR VENTS
